First, make sure the PHP version of your root folder is compatible with the version of Laravel you wish to install. Softculous offer only the latest version of Laravel (currently version 5.4), which requires PHP 5.6 or later. You also need to make sure that the phar and mcrypt PHP extensions are enabled.

If you are hosted with WebHostFace you can easily activate them from the “Select PHP Version” option:

If you wish to install Laravel in a subfolder, see our guide on how to change the PHP version per directory.

After making those configurations enter Softaculous which is also located under the “Software/Services” section in your Cpanel.

Search for “Laravel” in the search bar in the upper right corner. All you need to do is choose the domain for your new Laravel installation and choose the location in the “In Directory” section. If you want to install it in your public_html leave the field blank.

Keep in mind that by default, Laravel is installed in a subfolder called /public. To configure Laravel to open directly via your domain, follow the steps here.

If you wish to install an older version of Laravel, you need to use Composer. To install Laravel through Composer, follow the steps here. You can always contact the WebHostFace Team for Laravel assistance as well!

The post How to install Laravel? appeared first on WebHostFace KnowledgeBase.

Then you need to upload it to the desired folder and unzip it by right-clicking on it and selecting ‘Extract’.

After that open the folder containing the Oxwall files in your browser. If you have placed them in your public_html/oxwall/ folder , you should access it trough www.mywebsite.com/oxwall/

From there you can start the installation process.

If you get messages about missing PHP extensions, you can enable them from your cPanel >PHP Modules.

I. On the first step you will need to enter some basic information about the website. Be sure to provide a valid administration email and write down the username and password for the admin user.

II. The second step is the database connection. Here you will need to create a new empty database from cPanel > MySql Databases , create a MySql username (also write down the password for it).

Once created you need to add the username to the database. If you scroll down a bit on the ‘MySql Databases’ page in cPanel you will see ‘Add User To Database’ section where you have 2 drop-down menus.

Select the two newly created database and username and click ‘Add’. After that you will be redirected to a new page where you need to check ‘ALL PRIVILEGES’ and click ‘Make Changes’.

Then you can return to the Oxwall installation. You should fill the text fields as follows:

Host: localhost
User: your_mysqluser
Password: your_databasepass
Database Name: your_dbname
Table prefix: ow_

III. On the next step click ‘Continue’ to set the cron job running on every minute, we will edit it to run on every 10 minutes after the installation.

IV. This is the last step where you can select which plugins you would like to install along side with the application. Once you are done click ‘Finish’.

On the next page you should be presented with the ‘Installation complete’ message. From there you can choose to view the main page or the admin area.

Now we should change the time of the cron job that is running on every minute. In cPanel click on ‘Cron Jobs‘ under the Advanced tab.
If there is no cron job set to run on every minute you need to add it with the following command:

wget -q -O /dev/null http://mywebsite.com/ow_cron/run.php

Set 10 on ‘minute’ value and on all the rest set *. It should look like this:

10 * * * * wget -q -O /dev/null http://mywebsite.com/ow_cron/run.php

If there is already a cron job set, at the right end click ‘Edit‘ and change the value 1 to 10 and click ‘Edit line’.

You can go to the main page and finish your profile set-up and you should be logged in as admin.

With this the manual installation of Oxwall is completed.

The post How to install Oxwall manually appeared first on WebHostFace KnowledgeBase.

• The first step is to download the Zurmo installation package from the official Zurmo website. Choose the latest stable version and download the .zip archive file to your computer.

• Next you should upload the .zip archive file to a folder in your hosting account using FTP or the cPanel File Manager. After that just Extract the archive into the folder you wish your Zurmo CRM to open from.

*Note: Make sure there is a domain or subdomain (eg. mydomain.com; zurmo.mydomain.com) pointed to that folder, unless you desire to open it through a subfolder. Also make sure that the files are extracted in the folder you desire to and not some subfolder (eg. zurmo) as that will make your CRM open through that subfolder (eg. mydomain.com/zurmo).

• Create a database and a database user for it with all privileges using the MySQL Database Wizard in your cPanel.
• Open the domain or subdomain you have uploaded the Zurmo installation package to. You can look through the Welcome screen but don’t worry you won’t need all the things specified there to make the installation. Just click on Click to start.

• On the next step the installer will check our system against the Zurmo installation requirements. Our servers are configured to run Zurmo without a glitch but there are some optional services which might give you FAIL or WARNING.
• Our Apache version is 2.2.1 like the minimum required even though Zurmo can’t detect it. The other PHP extensions really are optional and are not required for your Zurmo CRM to run properly. You can however, enable them as well as change your PHP version through the PHP version selector in your cPanel you have with us.

• When you are done and have enabled the PHP extensions you desire from the optional ones, you can Recheck the system and see if everything is as you desire and Continue to install Zurmo manually.

• After that you would have to enter the database information for the database we created earlier. You should also enter your super user password. Remove Existing Data should be ticked as you are modifying an existing database. If you have enabled the memcache PHP extension, you would have to contact us so that we can supply you with the Memcache Hostname and Port Number for the server you are located in. Anything else is either optional or pre-entered for you.

• After pressing Install, the installer will start the process and give you a Sign in link to log into your new Zurmo CRM installation.

Feel free to contact with any questions you might be having or to install Zurmo manually for you. We’ll be more than happy to do so.

The post How to install Zurmo manually? appeared first on WebHostFace KnowledgeBase.

• The first step will be to log into your cPanel with us and click the Softaculous icon.

• On the left side you will find a list of categories.
• Choose a script from any of the categories.
• We are installing Zurmo, which belongs to the category ERP.

• Once you select Zurmo you will be able to access various details of it like ratings, reviews, demo, etc.

Fill in the Installation Details

• Click on the Install Tab.
• You will now see a form with various details.
• Fill in the details like protocol, domain name, directory, database name, admin login details, etc.

*Note: If you wish to install the script on the root of the domain eg: http://example.com please leave the In Directory field blank. You can’t also change the admin username here, it will stay super by default.

• Once you are done with the details click on Install button and this should do the trick. Installation time may vary in accordance to size of the script and other factors, please be patient.

• As soon as the installation is complete Softaculous will provide links to it.
• Click on the links provided and this should redirect you straight to the login page whichever you choose.

We can also install Zurmo for you for free. All you have to do is be a client of our and contact us for more assistance.

The post How to install Zurmo through Softaculous? appeared first on WebHostFace KnowledgeBase.

• The first step is to download the phpBB installation package from the official phpBB website. Choose the latest version and download the .zip archive file to your computer.

• Next you should upload the archive file to a folder in your hosting account using FTP or the cPanel File Manager. After that just Extract the archive into the folder you wish your forum to open from.

*Note: Make sure there is a domain or subdomain (eg. myforum.com; forum.mydomain.com) pointed to that folder, unless you desire to open it through a subfolder. Also make sure that the files are extracted in the folder you desire to and not some subfolder (eg. phpBB3) as that will make your forum open through that subfolder (eg. myforum.com/phpBB3).

• Open the domain or subdomain you have uploaded the phpBB installation package to. Feel free to read through the Introduction, License and Support documentation if you so wish.

• The next step is to press on the Install tab and look through the requirements to install phpBB manually. All of them are met on the WebHostFace servers so you can click Proceed to next step to continue.

• Installation compatibility is tested on the next page and again it should present no issues as WebHostFace servers are optimized for phpBB installations. Click on Start Install.

• Next up is the page to configure your database connection. You should create a new database and user if you haven’t already and connect them to your phpBB installation. You can now click the Proceed to next step button. If you have entered the details correctly, you will see a successful connection confirmation – just click Proceed to next step.

• On the Administrator configuration page you can enter the administrative details you desire for your newly installed board.

• Verify them and click on the Proceed to next step button again. If there are no errors, you will get the Tests passed message. You should click on the Proceed to next step button two more times. The second is to verify that the configuration file was written successfully.
• In the Advanced Settings page you can configure some settings which are only necessary to set if you know that you require something different from the default. You can also change them later from the Administration Control Panel if you so need to.
• Next you will receive a message that the phpBB database was created and populated and you should just press Proceed to next step button.
• After that you will be presented with 2 options to convert an existing board to phpBB or to log into your new phpBB forum. And that is it, you have successfully manually installed phpBB.

*Note: You should delete, rename or  move the Install directory before using your board. If this directory persists, only the Administration Control Panel will be accessible.

The post How to install phpBB manually? appeared first on WebHostFace KnowledgeBase.

The first step is to log into your cPanel with WebHostFace and click the Softaculous icon in the Software/Services section.

• On the left side you will find a sidebar with a list of categories.
• You can choose a script from any category or select the script from the top scripts in the middle of the page.
• phpBB is in the Forums category.
• Once you select the application, you will be able to see various details of that script like reviews, ratings, demo url, etc.

Fill in the Installation Details to install phpBB

• Click the Install tab.
• You will see a form with various installation details for needed for phpBB.
• Fill in the details like protocol, directory, domain name, database name, admin login details, language, etc.

*Note: If you wish to install the application on the root of the domain (eg.: http://myexample.com) please leave the In Directory field blank.

• Once you are done with the details, click on the Install button and this should do the trick. Installation time may vary according to the size of the application and other factors.

• As soon as the install phpBB is complete Softaculous will provide you with links to it.
• If you click on the links provided, they should redirect you straight to the site homepage or the admin page, whichever you want to go to.

*Note that you will be redirected correctly only if the domain name is pointed to your account with us.

The post How to install phpBB through Softaculous? appeared first on WebHostFace KnowledgeBase.

Log into your cPanel with us and click on the Softaculous icon in the Software/Services tab.

• On the left you will find a list of categories.
• Choose Pimcore from the Portals/CMS category.

Fill in the Installation Details

• Click on the Install Tab.
• You will see a form with various details.
• Fill in the details for protocol, domain name, directory, database name, admin login details, etc.

*Note : If you wish to install the script on the root of the domain eg: http://yourdomain.com please leave the In Directory field blank.

• Once you are done with the details click on the install button and this should do it. If Softaculous returns an error that you haven’t selected the correct PHP version, you should check this tutorial on the matter. Please be patient, installation time may vary according to the size of the script and other factors.

• As soon as the installation of Pimcore is complete Softaculous will provide you with links to it.
• Click on the links provided and they should redirect you straight to the front end page or the admin homepage whichever you choose.

*Note: In order for the provided links to work as intended, you must have added the corresponding domain as an addon in your cPanel and pointed its Domain Name Servers to our DNS Settings.

You can always contact us on our number or Live Chat and we will install for you free of charge.

The post How to install Pimcore? appeared first on WebHostFace KnowledgeBase.

If you find it difficult to use Softaculous, you can check our comprehensive video tutorials. Moreover, if you would rather like us to help you with the installation, you can always contact us on our phone, email or Live chat. We will gladly assist you in the matter and our technicians can even install the desired free scripts professionally for you upon request. This service will be completely free of charge.

The post Are there free scripts included with my hosting account? appeared first on WebHostFace KnowledgeBase.

• You should download the latest AbanteCart .zip package for installation from http://www.abantecart.com/;

• Upload the archive to the root directory of the domain you wish to install AbanteCart for and extract it there. *Note: You should upload them to the public_html folder of the account if you are going to use your primary domain or a different specific folder for addon or sub-domains;
• Create a new database through the MySQL® Database Wizard and assign a user to it;

• Go to the url where you uploaded the AbanteCart installation to, eg: yourdomain.com
• You will now see the AbanteCart installation page and the Open Software License, which you have to agree with to continue;

• Next you will see some pre-install checks which run automatically to detect your system settings. Click Continue when ready;
• Next you should enter the database name, user and password which you created earlier alongside creating your back-end unique name, username, password and email address;

• On the next step you will be given a secure key which is used to encrypt your customers’ data and you will need when moving your customers’ data to a different shopping cart installation. And you will also have the option to install demo data to your shop or import data from another application;
• After that the installation is complete and you should delete the install directory from the folder where AbanteCart is located;
• You can use the links at the end of the installation to go to your new online shop or to the administration section.

The post How to install AbanteCart manually? appeared first on WebHostFace KnowledgeBase.

The first step will be to log into your cPanel and click the Softaculous icon.

• On the left side you will find a list of categories.
• Choose a script from any category or select the script from the top scripts displayed in the center of the page.
• AbanteCart is in the E-Commerce category.
• Once you select the script, you will be able to access various details of that script like ratings, reviews, demo url etc.

Fill in the Installation Details

• Click on the Install Tab.
• You will now see a form with various details.
• Fill in the details like protocol, domain name, directory, database name, admin login details, language, etc.

*Note: If you wish to install the script on the root of the domain eg.: http://example.com please leave the In Directory field blank.

• Once you are done with the details click on install button and this should do the trick. Installation time may vary in accordance to the size of the script and other factors, please be patient.

• As soon as the installation is complete Softaculous will provide links to it.
• Click on the links provided, they should redirect you straight to the site page or the admin homepage whichever you choose.

*Note that you will be redirected correctly only if the domain name is pointed to your account with us.

The post How to install AbanteCart through Softaculous? appeared first on WebHostFace KnowledgeBase.